Your present location:HomeProduction capacity > Processing capacity
Processing capacity
Main Equipment
Serial No. Equipment Name Model Quantity Main technical performance
1 welding and cutting equipments
1.1 silicon DC welding machine ZSG-500 25 100A/24V 500A/40V
1.2 AC arc welding machine BX3-500 20 85/80V 50/600A
1.3 AC arc welding machine ZS-500 20 100/120V 100-800A
1.4 carbon dioxide-protection welding machine YM-600KH1HGE 18 AC 380V 50Hz 45KVA/600A, 100% duration rate, welding wire diameter: 1.6mm
1.5 air plasma cutter KLG-260-1 6 to cut stainless steel, cast steel, thickness: 60mm
1.6 micro-controled cutter WKQ-6000G 5 automatic cutting, thickness: 120mm
1.7 numetrical control spark cutting machine SK-321 6 processing maximum size of inner chamber: 401x500, thickness: 120mm
1.8 numerical control spark wire cutting machine DK7740 3 processing maximum size of inner chamber: 200x280, thickness: 40mm
2 forging and pressing machine
2.1 punch J36-800 1 stroke: 1000mm, height: 1200mm
2.2 close-style two-point press J36-400 1 stroke: 900mm, height: 1200mm
2.3 punch J11-100 4 stroke: 400mm, height: 900mm
2.4 punch J23-100 6 stroke: 130mm, height: 480mm
2.5 punch KYQ4 2 stroke: 150mm, height: 600mm
2.6 Shears Q11-20X2500 2 shears capacity:20X2500
2.7 Three Roller Bending Machine Z933 2 Sheet capacity:30X3000
2.8 oil press 400T 2 stroke: 880mm, area: 2400x1200
2.9 oil press 200T 2 stroke: 600mm, area: 1300x1200
2.10 oil press 800T 1 stroke: 1600mm, area: 3800x1800
2.11 oil press 1000T 1 stroke: 1800mm, area: 4200x2100
3 casting, heat treatment equipment
3.1 chamber resistor furnace H-60-A 2 1400x700x550
3.2 chamber resistor furnace TX-25 1 2200x350x380
3.3 silicon-carbon rod chamber furnace TX-25 1 600x280x300
3.4 well style carburizing furnace   1 Φ 500x800
3.5 cupola   2 capacity: 5T/h
3.6 ladle   3 load of molten steel: 10T, 6T
3.7 copper melting furnace   2 2T, 1T
3.8 intermediate frequency induction furnace   1 2T, 500KW
3.9 annealing furnace   1 4200x1900
3.10 annealing furnace   1 6000x2500
3.11 mold oven   1 6400x3100x2580
3.12 phenolic and molding S25 1 5³/H
4 hoisting equipment
4.1 double girder bridge crane   2 80t/20t
4.2 double girder bridge crane   6 30t/5t
4.3 double girder bridge crane   8 20t/5t
  single girder bridge crane   10 5T
4.4 double girder bridge crane   8 10t
5 equipment for detection of defects, and test
5.1 ultrasonic flaw detector CTS-22 3 The crack meter is convenient to use, can be used in a wide range and can detect fault in quite deep depth. It is used to detect the fault inside metal and nonmetal. Detecting depth can reach 1,000 mm
2 Intelligent non-destructive sorting device ZGF-Ⅲ 2 Rapid non-destructive examination
5.2 portable x ray flaw detector XX-2005 5 It is used for quantitative analysis of fault inside metal and nonmetal. Detecting depth can reach 23 mm.
5.3 penetrant inspection   2

Detecting the metal surface through abluent, penetrant, and image displaying machine.Intuitional and simple.

5.4 hydraulic pressure universal test machine WE-10 1

It is used for the tensile, compression, shearing and bending tests of metal materials

to test their physical performance. The maximum work load of the tester is 10 t.

5.5 Rockwell hardometer HR-150A 1

It is used for the hardness test of metal materials. Easy to operate.

5.6 computer-automatic Rockwell hardometer HRZ-150 1

It is used for the hardness inspection of metal materials and has the functions

of hardness value conversion and printout.

5.7 acidometer model 25 1

It is used for rapid acidity test of PH1-PH14 liquid.

5.8 scale TG328 2

It is used for accurate measure in chemical analysis. Convenient and rapid.

5.9 microcomputer controled visible spectrometer model 724 2

It is used for the chemical analysis of silicon, manganese, phosphor and so on.

5.1 carbon and sulphur determinator C871 model 2

It is used for the carbon and sulfur combined test of ferrous metal,

and has the functions of quantitative analysis and so on.

5.11 electrically heated drying cabinet 202-1 model 1

It is used for material drying and dryness detection during chemical analysis.

5.12 Motor Test Station   1

Generator model test and vertical generator driving test. Capacity of pulling motor: 800 KVA

13 synchronous distortion meter   1

Is applicable to measuring the rete of waveform distortion.

14 noise meter   1

Is applicable to measuring the telephone harmonic factor.

15 sonic receiver ND10 1

It is used for noise measurement

16 kelvin bridge QJ44 1

It is used for DC resistance measurement

17 Megohm meter 2500 V、500V 1

It is used for insulation resistance measurement

5.13 Physical and Chemical Analysis Center   1

Physical and chemical tests of main parts

6 anti-erosion and galvanization equipment for metal
6.1 pickling bath and galvanization bath   1 6000x3000x2000mm
7 metal processing and technique equipment
7.1 double-column numerical control vertical lathe CQ5280(NC) 1 Φ 8000x4000, 0.02/100
7.2 double-column numerical control vertical lathe CQ5250 3 Φ 5000x2000, 0.02/100
7.3 double-column numerical control vertical lathe CQ5240 2 Φ 4000x2000, 0.15/100
7.4 double-column numerical control vertical lathe CQ5235 4 Φ 3500x2000, 0.02/100
7.5 single-column numerical control vertical lathe CY5112 2 Φ 2250x1050, 0.15/100
7.6 single-column numerical control vertical lathe C516A 2 Φ 1600x1000, 0.03/100
7.7 numetrical control horizontal lathe CK6140/750 2 Φ 400x750, 0.01/100
7.8 numerical control horizontal lathe CK6140/1000 2 Φ 400x1000, 0.01/100
7.9 numerical control horizontal lathe CK6135/A 2 Φ 350x7500, 0.01/100
7.10 horizontal lathe C61160/1 1 1800x950x11200, 0.02/600
7.11 horizontal lathe C670 2 1400x890x9100, 0.02/600
7.12 horizontal lathe C650 2 1020x645x3000, 0.02/300
7.13 horizontal lathe C61100 4 1000x720x5000, 0.03/300
7.14 horizontal lathe CW6136A 8 Φ 360x750, 0.01/100
7.15 horizontal lathe CW618B 10 Φ 630x1500, 0.03/300
  horizontal lathe CW6163x4500 2 Φ 630x4500, 0.03/301
7.16 horizontal lathe C620 4 Φ 620x1200, 0.03/300
7.17 horizontal lathe C618 16 Φ 360x750, 0.01/100
7.18 floor type boring and milling machine T6920 2 Φ 900/Φ 40 40T
7.19 floor type boring and milling machine T6216A 4 Φ 750/Φ 30 30T
7.20 floor type boring and milling machine T6216C 3 Φ 600/Φ 20 20T
7.21 horizontal boring machine T68 3 Φ240/Φ20 5T
7.22 fine boring machine T716 2 Φ165/Φ35 5T
7.23 universal cylindrical grinding machine M1432 2 Φ320x1000
7.24 universal cylindrical grinding machine M1450 2 Φ500x3000
7.25 surface grinding machine in horizontal M7130 2 300x1000
7.26 surface grinding machine in horizontal M7150 2 500x2000
7.27 surface grinding machine in horizontal M7150 1 700x3000
7.28 frame planer B2016A 2 6000x1600x1250
7.29 shaping machine B665 4 600x400x100
7.30 shaping machine B690 2 1000x600x200
7.31 gear shaper Y54 2 gear width: external gear105, internal gear 75
7.32 slotting machine B5032 3 800x600x600
7.33 slotting machine B50100 2 1200x1000x1000
7.34 drilling machine with pivoted arm Z30100 1 Diameter 120, stroke 550
7.35 drilling machine with pivoted arm Z3080 2 diameter 80, stroke 450
7.36 drilling machine with pivoted arm Z3063 3 diameter 63, stroke 380
7.37 drilling machine with pivoted arm Z35 4 diameter 50, stroke 350
  drilling machine with pivoted arm Z3040 5 diameter 40, stroke 350
7.38 drilling machine with pivoted arm Z3125 4 diameter 25, stroke 160
7.39 universal tool grinding machine MVG27-75-24 2 Φ500x300, accuracy 0.003mm
7.40 universal tool milling machine X8126 2 270x700, 0.04/300
7.41 universal tool milling machine X53K 1 400x2000, 0.02/300
7.42 knee and column milling machine FWA41M 2 400x1600, 0.02/300
7.43 knee and column milling machine X63W 2 400x1600, 0.02/300
7.44 numetrical control processing center for blades HATEN-1690 1 900x1600
7.45 numetrical control processing center for blades HATEN-850 1 800x500
7.46 numetrical control frame processing center H-2503 1 2500x3000
8 coil production and test equipment
8.1 stator coil taping machine   2  
8.2 stator coil winding machine   1 maximum diameter: 2m
  Up-type electric machine

 

1 500X1500
8.3 inside hot type stator coil mould press intelligent 4 temperature infinite control (horizontal coil)
8.4 inside hot type stator coil mould press intelligent 2 temperature infinite control (vertical coil)
8.5 stator coil heating furnace electric heating 4 4000x1000
8.6 interturn impact puncture tester ZJ-30S 2 max voltage: 30KV
8.7 power and frequency puncture tester GP-100S 1 Max voltage: 100KV
8.8 power and frequency puncture tester GP-10S 1 Max voltage: 10KV
8.9 magnetic pole coil winding machine M9012B 1 500x1800
8.10 rotor coil winding machine horizontal 1  
8.11 oil pressure machine 400T 1 use for rotor coil forming(trip:880mm,area:2400×1200)
8.12 electrical motor test station   1 use for generator type test and horizontal generator drag test,the traction motor capacity is 800 KVA.
8.13 AC voltage equipment 2.5kV、100kVA 1 It is used for coil voltage testing
35kV、50kVA 1 It is used for coil voltage testing
100kV、10kVA 1 It is used for coil voltage testing
8.14 DC voltage equipment 60 kV、2mA 1 It is used for coil voltage testing
8.15 Between coils voltage equipment ZJ-30S 1 It is used for coil voltage testing